Page 19 - RACCORDERIEMETALLICHE - LISTINO 2025 - FIDRA

SISTEMI DI RACCORDI A PRESSARE 17
Press Fitting Systems • Press ttingsysteme • Système à sertir • Sistema de accesorios para prensar

Pressfitting system - M profile

The junction connection of RACCORDERIE METALLICHE mechanical strength through the mechanical deformation of the
- -
cess a deformation takes place on two planes. formed in its cross section and through its elastic properties cre-
ates the permanently tight joint.

the press crimp groove. This provides the following advantages:
A 20% enlargement of the sealing surface area;
Major reduction of the risk of the sealing ring being pressed
out or damaged;
Fìit makes the pipes insertion easier.

Description of the material used
to produce stainless steel pipes 316L. Unlike traditional systems made with AISI316, INOXPRES®
products present a lower content of carbon that gives a higher
resistance to corrosion.

Sealing rings - Fields of applications and technical data

OPERATING OPERATING APPROVALS
TEMPERATURE
TECHNICAL COLOUR MIN. -/MAX. PRESSURE AND FIELDS OF FACTORY
TERM MAXIMUM IN CERTIFICATION APPLICATION FITTED
DEGREES
CENTIGRADE BAR BASIS
Potable water, Heating, Cooling
KTW
EPDM black -20 / +120 °C 16 W 270 and refrigeration circuits, Treated yes
water, Desalinated water, Rain-
DVGW W 534
water, Compressed air (Class 1÷4)
G 260HTB Natural gas, Methane gas,
NBR HNBR yellow -20 / +70 °C 5 yes
DVGW G 5614 GPL (gaseous state)
FKM green -20 / +220 °C 16 - Solar, Compressed air (Class 5), yes
Salt water
STEAM white -20 / 165 °C 7 bara / 6 barg - Saturated Steam yes
Industrial applications following
MVQ red -20 / +180 °C 16 - approval by RM no

Reference norm WERKSTOFF NR. C SI MN P S N CR MO NI
EN 10217-7:2014 ≤ % ≤ % ≤ % ≤ % ≤ % ≤ % % % %
AISI316 / W.1.4401
0,07 16,5 2 10
X5CrNiMo 17-12-2
1 2 0,05 0,02 0,11
AISI316L / W. 1.4404
0,03 18,5 2,5 13
X2CrNiMo 17-12-2