Page 546 - RIVER - CATALOGO 2022

FAULT CAUSE REMEDY

WALL MOUNTED MIXERS – all the models

Non-stop
supply ring

Hot water Cold water
adjusting adjusting
and closing and closing

Cam with no-return valves
and stainless steel filters

non-satisfactory mixing non-return valve is locked the back pressure can lock one non-return valve
of the mixer. It is necessary that the system is
provided of traditional pressure shock absorber

INFRARED WASHBASIN AND RECESSED SHOWER TAPS AND MIXER
INFRARED RECESSED FLUSHOMETER Ø 3/4” FOR W.C.

the fitting do not work and do not supply water interception taps closed open and adjust the flow rate of the stop-taps

battery models take away the plate and replace the battery
empty battery and the LED blinks

230V models check the power supply
there is not power supply
damaged transformer
if the transfo rmer is well-run a green LED is
switch on, if the LED do not switch on replace
the transformer

electronic module do not work replace the electronic module

the fitting remain always open magnetic valve blocked if the electronic car-
tridge result working,
wash carefully the ma-
gnetic valve

the fitting supply few water stainless steel filters are dirty check the stainless steel filters of the taps and
the magnetic valve filter

INFRARED RECESSED URINAL Scatola da incasso
Recess-mounted box
Guarnizioni
Gaskets Rubinetto di chiusura
Closing tap
Raccordo Ø 1/2”
Threaded
connection R 1/2”
Elettrovalvola
(controllare la freccia
entrata e uscita)
Batteria Magnetic valve
alcalina 9V (check the inlet
9V alkaline and outlet arrow)
battery
Coperchio con
quadro elettronico
Electronic board
assembly

the fitting do not work and do not supply water battery models take away the plate and replace the battery
empty battery and the red LED blinks
230V models there is not power supply check the power suuply
electronic module do not work

interception taps closed open and adjust the flow rate of the stop-taps
546